Özel profiller, özel üreticiler

AUTOMOTIVE INDUSTRY

MACHINERY INDUSTRY

ARMS INDUSTRY

DOOR AND SECURITY SYSTEMS

01

02

03

04

LINEAR SLIDES

RAIL and BEARINGS

ENERGY

DEFENSE INDUSTRY

05

06

07

08

TEXTILE MACHINERY

AGRICULTURAL MACHINERY

EARTHMOVERS AND WORK MACHINES

WOODWORKING MACHINERY

09

10

11

12

PUMP

AEROSPACE

MEDICAL INDUSTRY

STANDARD PROFILES

13

14

15

T PROFILES

SPLINE SHAFT

19

countries

Exports to

Madencan Steel Proles was established in 2011 in the eld of Special Formed Steel Proles with an experience of 10 years. In short time, with each expert employee in their eld

and with continuous development and its innovative vision, MSP has revealed successfully eort. Especially for automotive, weapons and machinery industry in accordance with national and international standarts, MSP is active manufacturer of special formed steel proles.

 

Madencan Steel Proles has made and continues making the necessary investments, needed to bring optimum solutions for its customers' demands;

  • The necessary heat treatments and pre-heating processes
  • are made with an electrical oven and induction machines
  • Cold drawing processes are done with a cold drawing machine having 300 ton drawing capacity and is 12 mt in length.
  • Surface treatments are made with a shot blasting machine and a chemical process facility
  • All the parameters of a production part designated by the customer are controlled in its laboratory.

Special Formed Cold Drawn Steel Profiles

Cold drawn profile, is to manufacture complex engineering designs as steel pro_les with excellent precision.

Today, there are plenty of application examples of low and medium carbon steel, case-hardened

steel, bearing steel and stainless steel in automotive, machinery, weapons, agriculture and medical industries.

The advantages of cold-drawn steel are as follows;

  • smooth surfaces
  • precise edges
  • equal tolerances in mass production
  • while increasing yield strength, tensile strength and hardness, decrease the necessity for hardening.
  • Increases machining efficiency and extends tool life
  • Closer tolerances than other cold forming processes can be obtained, size tolerances of ± 0,1mm

can be obtained

  • Reduces cost;
  • Less waste
  • Less labor cost
  • less energy and
  • faster and cheaper production in less time.

Cold drawn steel profiles, in many cases, continue to be the best solution for special engineering designs,

with their economical advantages.

 

 

 

MADENCAN ÇELİK PROFİL MAKİNA SAN. VE TİCARET LTD. ŞTİ.

Adres:
Saray Mahallesi F.S.M. Bulvarı Yurt Sok. No:315 C KAZAN ANKARA
Tel: +90 312 815 30 06
Fax: +90 312 815 30 07
Tic. Sic. No:1996-KAZAN
Mersis No:0-6100-1400011 KAZAN V.D. V.NO:610 039 06 14
DUNS NO: 505 200 164

info@madencan.com

Submitting Form...

The server encountered an error.

Form received.

PRODUCTION CAPACITIES AND QUALITIES

Section: 78 - 4.414mm

According to the customer demands, all sections between the range of 5mm to 100mm can be manufactured.

This interval can also be expressed as 0,61kg/m - 34,64 kg/m.

 

Length: 1.500 - 9.000mm

Prole length are determined according to customer demands and processes, trying to keep the waste in minimum. Maximum length to be produced is 9mt. For special requests the proles can be cut into specic lengths.

 

Surface Quality:

Cold drawn surfaces are usually much better than those of machined parts. Unless otherwise stated, Ra is between 1,2-2,5.


Tolerances:

The general tolerance for the sectional dimensions is ±0,1mm (±0,05mm can be achived upon request)

 

Material Quality:

In line with the demands of our customers to be specied in the following types of steel, a very steel type, prole, international

material produced adhering to standards denition.

Carbon Steels (SAE 1010-1050 and similar)

Heat Treatable Steels

Case-hardened steels (C 15, 14NiCr14 , 16MnCrS5 and similar)

Free Machining Steels (9SMnPb28 - 9SMnPb2836, 35S20 and similar)

Structural Steels ((St 37-2 , St 52-3, St 60 and similar)

Bearing Steels ((100Cr6 ve 100CrMn6)

Stainless Steels (ASTM 304, 310, 316 , X20Cr13 and similar)

 

Quality Control System:

Our processes are designated and applied according to ISO 9001:2008 Quality Management System standards.

Certication work is in progress.